Best Blinds for Casement Windows: How to Work Around the Crank Handle

by Yuvien Royer on Nov 13 2026
Table of Contents

    Quick answer: The best blinds for casement windows are slim, cordless shades, such as cellular or roller shades, mounted so they clear the crank handle. You have three ways to do that: use an outside mount so the shade hangs in front of the crank, use an inside mount if the frame is deep enough for the shade to pass the handle, or swap the crank for a folding or T-shaped handle. A motorized shade helps when the window is over a sink or counter.

    Casement windows are hinged at the side and open outward with a crank. They seal tightly and catch a breeze well, but the crank handle sticks into the room right where a shade wants to hang. Order blinds without planning for it, and the bottom rail lands on the handle every time. This guide shows how to measure around the crank, which shades fit best, and how to mount them.

    Slim motorized roller shade on a window, a good fit for casement windows with crank handles

    A slim roller shade keeps a low profile. Shown: Motorized Blackout Roller Shades – Linen.

    Why Casement Windows Are Tricky

    • The crank handle. It sits at the bottom of the frame and projects into the room.
    • The screen is on the inside, so there’s less usable depth in the frame than you’d expect.
    • They’re often tall and narrow, and frequently installed over kitchen sinks, where reaching the window is awkward.
    • You need to reach the crank to open the window, so the covering can’t block it permanently.

    The good news is that the sash swings outward, so an interior shade never gets in the way of the window opening. The same advice applies to awning windows, which are hinged at the top and use the same crank.

    Three Ways to Clear the Crank

    Approach How It Works Best When
    Outside mount The shade mounts on the wall or trim above the window and hangs in front of the crank The frame is shallow, or the handle sticks out past the frame
    Inside mount The shade sits inside the frame, in front of the handle The frame is deep enough for the shade to pass the handle
    Swap the handle Replace the crank with a folding or T-shaped handle that sits nearly flat You want an inside mount but the standard crank is in the way

    Folding and T-handles are inexpensive and sold at hardware stores. Match the spindle size of your window operator before buying one.

    How to Measure a Casement Window for Shades

    1. Measure the frame depth from the front edge of the frame to the screen or glass.
    2. Measure how far the crank projects into the room from the screen, with the handle folded or turned to its flattest position.
    3. Compare the two. If the handle sits well inside the frame, an inside mount may work. If it reaches the front of the frame or beyond, plan an outside mount or a handle swap.
    4. Check the product’s depth requirement. As one example, the no-drill option on Canisteo roller shades needs a frame depth of at least 1.49 inches.
    5. For an outside mount, make sure the shade will hang far enough from the wall to clear the handle, and add width on each side for privacy.

    Full instructions are in our how-to-measure guide. For shallow frames, see blinds for shallow windows and how to outside-mount a roller shade.

    Best Shades for Casement Windows

    Cellular shades

    Cellular shades have a slim headrail and stack into a small bundle when raised, which leaves the glass and the crank clear. They also insulate. A top-down/bottom-up version can stay lowered from the top while the bottom is raised above the crank.

    Roller shades

    Roller shades are a single flat panel with a small roll at the top. They suit the tall, narrow shape of most casements and wipe clean, which matters over a kitchen sink.

    Zebra shades

    Zebra shades let you adjust light without raising the shade, so you touch them less often. They need a little more headroom for the cassette.

    What to avoid

    Thick wood or faux-wood slats stack deep and tend to hit the handle. Interior shutters can block access to the crank. Corded blinds add a cord that tangles around the handle.

    Top-down bottom-up cellular shade that can be raised from the bottom to clear a casement window crank

    A top-down/bottom-up shade can lift clear of the crank and still give privacy. Shown: Motorized TDBU Cellular Shades.

    Why Motorized Shades Suit Casement Windows

    • Hard-to-reach windows. Casements over sinks, counters, and tubs are a stretch. A remote moves the shade from across the room.
    • No cords near the crank. Motorized shades have nothing to catch on the handle.
    • A stop point above the handle. You set the bottom limit, so the shade can stop just above the crank if you prefer. Our remote control guide shows how to set limits.
    • Raise before you open the window. A breeze through an open casement pushes on a lowered shade. One button raises it first.

    Tips for Living with Shades on Casement Windows

    • Raise the shade before cranking the window open on a windy day.
    • Turn the handle to its flattest position when you finish, so it stays out of the shade’s path.
    • In kitchens, choose a wipe-clean roller fabric.
    • If several casements sit side by side, use one shade per window so each can be raised on its own.

    A Note on Tilt-and-Turn Windows

    Tilt-and-turn windows open inward, which is a different problem. A shade fixed to the wall above would block the sash from swinging in. These windows usually need a shade mounted on the sash itself, or an outside mount set high enough to clear the open window. Browse our no-drill shades for options, and check the fit with our support team before ordering.

    Frequently Asked Questions

    What are the best blinds for casement windows?

    Slim, cordless shades work best. Cellular and roller shades have low-profile headrails and raise fully to leave the crank clear.

    How do I keep blinds from hitting the crank handle?

    Use an outside mount so the shade hangs in front of the crank, choose an inside mount only if the frame is deep enough, or replace the crank with a folding or T-shaped handle.

    Should casement window blinds be inside or outside mount?

    It depends on depth. If the handle sits well inside the frame, an inside mount looks cleanest. If the handle reaches the front of the frame, use an outside mount.

    Can I use motorized shades on casement windows?

    Yes. They suit casements over sinks and counters, have no cords to catch on the crank, and can be set to stop above the handle.

    Do blinds stop a casement window from opening?

    No. Casement windows swing outward, so an interior shade doesn’t block the sash. You only need access to the crank.

    Get the Fit Right

    Measure the crank before you order, choose a slim shade, and pick the mount that clears the handle. Browse cellular shades, roller shades, or our best sellers, and see our Black Friday deals.